Pelican
Get the app

Polestar 4

Parameters

The Polestar 4 has 1 parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Total distance POLESTAR4_TOT_DIST

  • Service 22DID DD01
  • ModuleD016 → 1EC6EE80
  • Every30 s
  • Testing for 2024 to 2025

Bits 0 to 23 of the reply, 24 bits.

Formula
val
Range
0 to 16777215 km
Unit
km

In testing for 2024 to 2025. Supported for 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Trips

Total distance POLESTAR4_TOT_DIST

  • Service 22DID DD01
  • ModuleD016 → 1EC6EE80
  • Every30 s
  • Testing for 2024 to 2025

Bits 0 to 23 of the reply, 24 bits.

Formula
val
Range
0 to 16777215 km
Unit
km

In testing for 2024 to 2025. Supported for 2026.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jkor↓↑
Move down or up through a list or a grid.
hlor←→
Move across a row or between cards.
Enter
Open the focused link.
for/
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.